OlyLife P90 Review: Independent Magnetic Field Test vs PEMF Mat
If you are researching the OlyLife P90, PEMF therapy, or magnetic field testing, understanding how these devices operate is important. In this independent OlyLife P90 review, we compare the OlyLife P90 with a traditional coil-based PEMF mat using a TriField TF2 meter to measure magnetic field activity.
Many people searching for an OlyLife P90 review are looking for objective testing rather than marketing claims. In this article, we demonstrate how a TriField TF2 meter can be used to detect magnetic field activity and compare the results between two different wellness technologies.
Watch the Independent OlyLife P90 Magnetic Field Test
What Is PEMF?
PEMF stands for Pulsed Electromagnetic Field therapy. A PEMF system uses coils to generate a pulsed magnetic field that can pass through clothing, bedding, and the body without requiring direct skin contact.
PEMF mats are commonly used for relaxation, recovery, wellness support, and maintaining an active lifestyle. The key component in a PEMF system is the coil, which creates the pulsed magnetic field.
Many people researching PEMF therapy are specifically looking for systems that generate measurable magnetic field activity.
Learn more about PEMF technology:
How We Performed the Magnetic Field Test
For this OlyLife P90 review, we used a TriField TF2 meter in magnetic field mode. The purpose of the test was to measure and compare magnetic field activity above a traditional PEMF mat and the OlyLife P90.
The same meter was used throughout the demonstration to maintain consistency.
We first measured the magnetic field directly above the coils of a full-body PEMF mat. The TriField TF2 responded clearly as the pulsed magnetic field cycled on and off.
To demonstrate how the magnetic field extends away from the applicator, measurements were also taken at increasing heights using yoga blocks.
PEMF Mat Results
At approximately 6 inches (15 cm) above the mat, the TriField TF2 continued to detect magnetic field activity.
At approximately 1 foot (30 cm) above the mat, the magnetic field remained measurable.
At approximately 1 foot 3 inches (38 cm) above the mat, the TriField TF2 continued to show a clear magnetic field response.
These measurements demonstrate how a pulsed electromagnetic field can be detected beyond the surface of a coil-based PEMF mat.
OlyLife P90 Magnetic Field Test
The same TriField TF2 meter was then used to test the OlyLife P90.
Measurements were taken while operating the device at multiple settings, including levels 6, 7, and 20.
During the magnetic field test, no visible change or measurable magnetic field response was observed on the TriField TF2 meter when positioned above the OlyLife P90.
To verify the meter was functioning correctly, the full-body PEMF mat was tested again immediately afterwards. The meter again responded to the pulsed magnetic field generated by the PEMF coils.
The OlyLife P90 was then re-tested at level 20 using the same procedure, with no observable response detected on the TriField TF2 in magnetic field mode.
Understanding the Difference
This comparison is not intended to determine whether one product is better than another. Rather, it is designed to demonstrate how magnetic field measurements can be performed using a TriField TF2 meter.
A traditional PEMF mat generates a magnetic field using coils. The TriField TF2 is capable of detecting that magnetic field during operation.
The OlyLife P90 produced different results during this magnetic field test, which may indicate that it operates using a different mechanism than a traditional coil-based PEMF system.
Independent testing allows consumers to better understand how different wellness technologies function and how those technologies can be measured.
Why Magnetic Field Testing Matters
Consumers researching PEMF therapy often want to understand whether a device generates a measurable magnetic field and how that field behaves during operation.
Using a TriField TF2 meter provides a simple way to observe magnetic field activity and compare different technologies.
Independent demonstrations can provide additional information beyond marketing materials and allow viewers to see how measurements are performed in real-world testing situations.
Next Test: Electricity Mode
In the next video, we will examine what occurs when the TriField TF2 is switched to electricity mode and used to test the OlyLife P90.
This follow-up demonstration will explore the differences between magnetic field measurements and electrical field measurements and help viewers better understand how these technologies can be evaluated.
Learn More About PEMF Technology
For more information about PEMF systems, PEMF mats, and pulsed electromagnetic field technology, visit:
Phone Australia:
0414 644 120
Phone International:
+61 414 644 120
Contact PEMF.inc to learn more about professional-grade PEMF systems and PEMF technology.